angular speed
英 [ˈæŋɡjələ(r) spiːd]
美 [ˈæŋɡjələr spiːd]
网络 角速度; 角速率
双语例句
- A method of solving the angular speed and attitude angular of high spinning projectile was proposed by accelerometers'specific force signal in existence of installation errors.
研究了存在安装误差时基于加速度计比力信号解算高自旋弹丸角速度和姿态角的方法。 - The paper introduces a calibration method of low angular speed and researches the method of speed device.
主要描述速率转台低角速率的一种校准方法，并对该方法进行分析探讨。 - If an angle is changing with time, we may define an angular speed.
如果一个角随时间而变化，我们就可确定一个角速率。 - Actually, we are rotating at unit angular speed.
实际上，是以单位角度旋转。 - Forecast Model and Error Analysis of the Line-of-Sight Angular Speed of Short Range Missiles
近程导弹瞄准线转动角速度预测模型及误差分析 - An accurate EKF observer was studied which estimates angular speed and position of the rotor, stator flux linkage and torque of IPMSM.
EKF对永磁同步电动机的转子位置、角速度、定子磁链和转矩进行了精确参数估计。 - The curl actually measures twice the angular speed of a rotation part of a motion at any given point.
旋度实际上衡量的是，在任意给定点，运动旋转角速度的两倍。 - The statistical properties of random angle signal due to angular speed fluctuation of rotating machine are proposed.
首先推导了旋转机械转速波动的随机角位移统计特性，证明了随机角位移信号是一种非平稳的随机过程。 - By analyzing variable regulation of the measured angular error of target, the track fusion method based on the angular speed of the line-of-sight of target in distributed structure is provided. Track status fusion is achieved by the way of great likelihood estimation.
通过对目标被测误差角变化规律分析，提出了分布式结构中基于目标视线角速度的航迹融合方法，运用极大似然估计法进行了航迹状态估计融合。 - The exact relations among the dynamic and static frequency of a spin tube gun and the angular speed are obtained.
阐明了转管炮的动频和相应振型与对应静频和相应振型及转动角速度之间的精确关系。 - According to setting relation of taper gear, movement efficiency is analyzed with angular speed polygon.
采用角速度多边形根据圆锥齿轮安装关系进行运动效率分析。 - This paper describes the structural components of the angular speed microsensor utilizing a pulse width modulation ( PWM) Electrostatic Servo Technique and analyzes its principle of operation and presents its fundamental sensing principle.
本文介绍了采用PWM静电伺服技术的微型角速度传感器的结构组成，分析了其工作机理，提出了其基本的检测原理。 - Theoretical analysis and calculation of angular speed sensor
角速度传感器理论分析与计算 - The harmonic chain drive has a periodically varied theoretical chain length during its operation. This paper analyzes the changes in theoretical chain length when wave generator is at different positions, and indicates their effect on driven sprocket angular speed and transmission ratio.
谐波链传动在传动过程中所需链条的理论长度呈周期性变化，分析了传动中波发生器处在不同位置时链条理论长度的变化情况，并指出了这种变化对从动链轮角速度及传动比的影响。 - A smooth high-gain segment control algorithm with small angular error are presented, the optimal tracking control for time, position angular speed, and acceleration can be realized at the same time. Meanwhile the data forecast method of the traced target is given.
提出了随动系统的分段平滑高增益控制算法和小角度误差控制算法，可实现位置、速度、加速度和时间的最佳跟踪控制，同时给出了跟踪目标数据的预报方法。 - In the case of the disk rotating at the uniform angular speed, the differential equation of motion of the system is derived based on the Lagrange equation.
在旋转圆盘以匀角速度转动的情况下，根据Lagrange方程，导出了系统的运动微分方程。 - In utilizing the variation rule of the instantaneous angular speed of the diesel crankshaft.
本文利用柴油机曲轴瞬时角速度的变化规律，作为判断柴油机故障的有效手段。 - According to the definition of angular speed and angular acceleration, the basic algorithm of nonlinear differential equation is given. The motion of simple pendulum with a vibrating hanging point is simulated by using computers.
根据角速度和角加速度的定义，给出了处理非线性微分方程的基本算法，用计算机形象直观地模拟了悬点振动单摆的运动。 - Some viewpoint, correlative term of the definition and uncertainty for calibrating the fluctuant rate of angular speed are presented in this paper.
本文在对角速度波动率测量技术研究的基础上，提出了一些自己的看法，并对一些相关术语进行了定义，同时，对角速度波动率测量方法的不确定度评定进行了分析。 - Furthermore, in order to connect with microprocessors more convenient and thus digitizing the drive system, several methods of using an incremental photoelectric coding plate are analyzed to realize an angle or angular speed sensor.
此外，为使系统能更方便的与微处理器接口，实现驱动系统的数字化，本文还分析了利用增量式光电编码盘实现伺服系统角速度及角度传感器的几种方法。 - The paper focuses on the analysis on Model 2K-H Planetary Mechanism Soft Start System and deducts the characteristic relationships of torque, angular speed, power of input axle, inner gear, output axle and loads using constant acceleration start and sine angular acceleration.
着重对2K&H型行星机构软起动系统进行分析，推出了输入轴、内齿轮、输出轴的力矩、角速度、功率与采用等加速度起动和正弦角加速度起动负载的特性关系。 - The model considers as its states the helicopter vertical and horizontal velocities, vertical and horizontal displacements, and the rotor angular speed.
其中的状态变量包括直升机的水平和垂直速度、水平和垂直位移以及旋翼转速。 - In processing of the guidance by radar and infrared sensor, it is put forward that the target distance is provided by radar, and the angular position or the angular speed of the line-of-sight of target is provided by data fusion of radar and infrared sensor.
雷达/红外双模制导过程中，提出了目标距离由雷达提供，目标视线角位置或角速度由雷达和红外融合提供。 - Study on Momentary Angular speed Ratio of Non-circle Gear Mechanism
关于非圆齿轮机构瞬时角速比规律的研究 - Fully utilizing the character of the nonholonomic system, we control the movement of the trailers with two inputs-the velocity and Angular speed of the tractor.
同时充分利用非完整系统具有输入空间的维数比可控制的位形空间小这一特殊属性，仅用两个输入：牵引车速度和转向角，来控制拖车系统的运动。 - Z directional the pressure detection uses a cantilever beam pressure sensor, uses the light emitter diode and the photorectifier cooperate the special mechanism to detect the acupuncture and moxibustion turning angular speed in the XY plane.
其中Z向针灸下压力的检测采用悬臂梁压力传感器，对XY平面内的针灸扭转角速度的检测采用发光二极管和光电二极管配合特制的机械结构进行检测。 - Some parameters used in the gear meshing contact-impact model are obtained based on Hertz contact theory, then a series of angular speed, meshing force, the meshing frequency and other simulation datas are figured out by simulating.
基于赫兹接触理论得到了齿轮啮合接触碰撞模型参数，通过模型仿真得到了角速度、啮合力、啮合频率等仿真数据。 - According to the image rotation theory of Dove prism, rotary coupling of multi-channel optical signals is realized using a gearing system with an angular speed ratio of 2: 1.The major achievements in this thesis are: 1.
在此基础上论文采用了一种使用道威棱镜的多通道光纤旋转连接器的设计方法。根据道威棱镜的转像特性，利用转速比2：1的传动机构实现了连接器多路光信号的旋转耦合。 - The study has clarified the kinematical relationship between balls rolling speed and drive nut axis revolving speed, deduced the revolution and rotation angular speed of the rolling body and acquired the contact point position and sliding speed of the rolling body in double nut.
求解了滚珠滚动速度与驱动螺母轴转速之间的运动关系，推导出滚动体公转和自转角速度，求取双螺母内滚动体接触点位置及滑动速度。 - In addition, energy balance control of calcination process is deduced using Arrhenius empirical equation, on this basis, the linear regression prediction model concerning the logarithm of calcination angular speed versus the calcination temperature is established.
依据阿累尼乌斯经验方程推导过程煅烧段能量平衡控制的核心思想。在此基础上，建立了过程煅烧转速对数与煅烧温度倒数的线性回归预测模型，并对其模型的特性及逼近精度进行了分析和讨论。